Skip to content
English
Log a ticket Customer portal
Book Training Now
  • There are no suggestions because the search field is empty.

Installing CommBox Gen 2 LED Board on a Mobile Stand

Learn how to safely install the CommBox Gen 2 LED board on a mobile stand, ensuring correct assembly and alignment for optimal performance.

Applies To
CommBox LED Board Gen 2 Elite & Ultra Series (120”, 138”, 150”, 165”, 180” models)

Step-by-Step Instructions

  1. Assemble the Mobile Stand

    • Identify and gather all stand components.

    • Use the appropriate tools to securely tighten mounting screws as per the illustrated assembly guide ().

  2. Install the Bracket

    • Select bracket accessories for your specific screen size.

    • Attach the bracket to the mobile stand; confirm levelness before proceeding.

  3. Prepare for Screen Installation

    • Ensure stand casters are locked and the wall mount is level.

    • Identify cabinet numbers; start from the centre, working outward when mounting cabinets.

  4. Assemble the Cabinets

    • Engage hooks on upper and lower parts between cabinets.

    • Lock the spring pins on sides with an Allen wrench to secure cabinet columns.

    • Repeat for all columns until the full screen structure is assembled.

  5. Assemble the Bottom Frame

    • Connect left and right frame sections using supplied connector plates and screws.

    • Attach Wi-Fi module and connect wiring per the wiring diagram.

    • Secure bottom frame to the screen assembly with locking blocks and retaining screws.

  6. Connect Power and Signal Cables

    • Connect vertical and horizontal power and signal cables between cabinets.

    • Connect cables to the bottom frame following power and signal diagrams.

  7. Install the LED Modules

    • Align each LED module using the calibration number labels.

    • Gently press modules into connectors; do not force connections.

    • Correct any unevenness immediately to ensure a flush display surface.

  8. Install Bottom Frame Cover Plate

    • Starting from the right, align locating pins of the cover plate; magnetic attachments will secure it automatically for a seamless finish.

Troubleshooting / What to Do If It Doesn’t Work

  • Cabinets Not Aligning Properly: Recheck bracket levelness and cabinet hooks; adjust as needed.

  • Modules Not Sitting Flush: Ensure connectors are properly aligned; gently reseat the module.

  • No Power or Signal: Confirm all cables are fully connected and seated; check power source.

  • If issues persist, log a ticket on the Support Portal at https://support.commbox.com.au/knowledge/kb-tickets/new.

Related Articles

  • Installing CommBox Gen 2 LED Screen on a Wall

  • Replacing LED Modules on CommBox Gen 2 Screens

  • Connecting External Devices to CommBox LED Screens