How to use Video Pilot on CommBox AI
Learn how to analyse a video and create a transcript, timeline and summary on your screen.
Applies To
CommBox Classic S5 with Goanna Firmware or later
CommBox AI
Step-by-Step Instructions
Step 1: Open Video Pilot
Open the Side menu, then the Launcher, then tap Video Pilot.
Step 2: Add a video
Tap Add and choose a video file from USB or local storage. The guide states that common formats such as MP4 and AVI are supported.
Step 3: Start the AI analysis
Play the video inside Video Pilot if needed, then tap the Video Pilot button in the bottom-right corner to begin analysis.
Step 4: Review the results
When the analysis is complete, Video Pilot creates:
- a transcript
- a summary of the video
- a timeline with labelled segments
Step 5: Adjust language or font size if needed
If the video is not in English, select Video Language at the bottom of the Video Pilot screen. To change text size, tap the Settings cog and choose Font Size.
💡 Tip: Video Pilot helps you pull out key points fast, which is useful for revision, review and sharing concise notes.
Troubleshooting / What to Do If It Doesn’t Work
If Video Pilot cannot analyse the video:
- Check the file type
- Confirm the USB or network drive is still connected
- Try a shorter video
- Restart Video Pilot and add the video again
If the issue continues, log a ticket on the Support Portal at Knowledge Base.