Classic S5
      Back to home
      1. Knowledge Base
      2. CommBox Interactive
      3. Classic S5

      Waking up your CommBox and putting it in standby

      If the CommBox is in Standby mode, you can wake the CommBox by pressing the Power button on the front of the CommBox or remote control.

      If the CommBox is set to another input like HDMI input, the CommBox will wake automatically when the device connected wakes.

      To return the CommBox to Standby mode, quick press the Power button on the front of the CommBox or remote control.

      Note: you can set advanced power saving settings in device settings, which define when the screen will power off when inactive.