Skip to content
  • There are no suggestions because the search field is empty.

How to Switch Input Sources on Your CommBox Meeting Room Display Gen 2

Learn how to switch between connected devices on your CommBox Meeting Room Display Gen 2 using the remote control or the screen's buttons.

Applies To CommBox Meeting Room Display Gen 2 — All models

Step-by-Step Instructions

Step 1: Open the Source List

  • Press SOURCE on the remote control, or
  • Press INPUT on the screen itself
  • The source list will appear showing: HDMI 1, HDMI 2, DP, TYPE-C, and VGA

Step 2: Select Your Input

  • Use the arrow keys (▲ ▼) to highlight the input you want
  • Active inputs will be clearly visible on screen

Step 3: Confirm

  • Press OK on the remote to confirm
  • The screen will switch to that input and display the connected device's output

💡 Tip: If a device is connected but not showing up, check the cable is firmly plugged in at both ends and the device is turned on and outputting video.

Step 4: Enable Auto-Switch (Optional)

  • Go to MENU > System Settings > Signal Auto Jump
  • Toggle it on to have the screen automatically switch when a new device is connected

💡 Tip: Signal Auto Jump is really handy in a classroom or meeting room — when someone plugs in their laptop, the screen switches automatically without anyone needing to touch the remote.

Troubleshooting / What to Do If It Doesn't Work

  • Source list shows no active inputs — confirm the device is powered on and the cable is properly connected
  • Screen auto-switches to the wrong input — go to MENU > System Settings and turn off Signal Auto Jump
  • If you need help, log a ticket on the Support Portal in Knowledge Base: https://support.commbox.com.au/knowledge/kb-tickets/new

Video Tutorial Refer to the CommBox Support Portal for guided videos at support.commbox.com.au.