Skip to content
English
Log a ticket Customer portal
Book Training Now
  • There are no suggestions because the search field is empty.

How to pair remote using Bluetooth to LED board

  1. Check that your LED remote supports Bluetooth.
    1. Open the battery compartment of the remote 
    2. Look for cutout with small green board
    3. If the remote has the cutout and small green board, the remote will support Bluetooth
  2. Enable Bluetooth on the LED board from the main settings menu
    1. Select "search for nearby devices"
  3. On the LED remote, press and hold the "Enter/OK" button and the "Volume-Down" button together. 
    1. Press and hold until the green light indicator starts flashing on the top of the remote.

    4. On the LED board, select the new Bluetooth device found in the pairing list.

You can now use the LED remote from a greater distance and without direct line of sight to the Infrared Receiver of the LED board.